[ GPS device ]

Reachfar RF-V43 on TrackeraX

The Reachfar RF-V43 is a personal tracker that works with TrackeraX over the watch protocol on port 6093. From the platform it supports sos alarm, low battery alarm and removal alarm, plus custom commands. The server decodes 7 alarm types from this protocol, such as fall, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6093 (watch protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Reachfar RF-V43 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • SOS alarmalarmSos
  • Low battery alarmalarmBattery
  • Removal alarmalarmRemove
  • Alarm clockalarmClock
  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • PhonebooksetPhonebook
  • Set time zonesetTimezone
  • SOS numbersosNumber
  • Reboot devicerebootDevice
  • Power offpowerOff
  • Text messagemessage
  • Voice messagevoiceMessage
  • IndicatorsetIndicator
  • Silence timesilenceTime
  • Custom commandcustom
  • Request photorequestPhoto

[ Data reported by the watch protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Audio fileaudio
  • Battery levelbatteryLevel
  • Heart rateheartRate
  • Photoimage
  • Motionmotion
  • GSM signalrssi
  • Satellitessat
  • Stepssteps

Numbered inputs and sensors

  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • FallfallDown
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Low batterylowBattery
  • Power cutpowerCut
  • Removalremoving
  • SOSsos

[ Protocol-specific attributes ]

bloodOxygen · pressureHigh · pressureLow

[ Other Reachfar models ]

[ Other devices on the watch protocol ]

Reachfar RF-V43 FAQ

Which port does the Reachfar RF-V43 use to connect to TrackeraX?

The Reachfar RF-V43 uses the watch protocol and connects to port 6093 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Reachfar RF-V43 send to the platform?

TrackeraX reads 9 parameters of the watch protocol on this device, for example: Audio file, Battery level, Heart rate, Photo, Motion. Each one can become a sensor or an alert.

Can I send commands to the Reachfar RF-V43 from TrackeraX?

Yes. From the map or the device page you can send 16 command types to the Reachfar RF-V43, including: SOS alarm, Low battery alarm, Removal alarm, Alarm clock, Request position.

Which alarms does the Reachfar RF-V43 report?

TrackeraX recognizes these watch alarms: Fall, Geofence entry, Geofence exit, Low battery, Power cut. Any of them can become an email, push or webhook notification.

How do I add the Reachfar RF-V43 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6093 and create it in TrackeraX with its IMEI, choosing the Reachfar RF-V43 model.

Try the RF-V43 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.