[ GPS device ]

Recoda M610 on TrackeraX

The Recoda M610 is a GPS tracker that works with TrackeraX over the recoda protocol on port 6151. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6151 (recoda protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Recoda M610 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

Recoda M610 FAQ

Which port does the Recoda M610 use to connect to TrackeraX?

The Recoda M610 uses the recoda protocol and connects to port 6151 on your TrackeraX server. Just set your platform domain and that port on the device.

How do I add the Recoda M610 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6151 and create it in TrackeraX with its IMEI, choosing the Recoda M610 model.

Try the Recoda M610 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.