Ruptela FM-ECO 4 on TrackeraX
The Ruptela FM-ECO 4 is a vehicle tracker with GPS/GLONASS. It comes with an internal battery and a 1-Wire interface. It is rated IP67 against dust and water. In TrackeraX it connects over the ruptela protocol on port 6046 and accepts 10 commands from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6046 (ruptela protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Ruptela FM-ECO 4 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Hardware and connectivity ]
- 1-Wire
- Internal battery
- GLONASS
- IP67
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Output controloutputControl
- Firmware versiongetVersion
- Configurationconfiguration
- Firmware updatefirmwareUpdate
- Server connectionsetConnection
- Set odometersetOdometer
- Custom commandcustom
- Request photorequestPhoto
[ Data reported by the ruptela protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- Device temperaturedeviceTemp
- Driver ID (RFID / iButton)driverUniqueId
- Fault codes (DTC)dtcs
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- HDOPhdop
- Ignitionignition
- Photoimage
- Motionmotion
- OBD odometerobdOdometer
- OBD speedobdSpeed
- Odometerodometer
- Mobile operatoroperator
- External powerpower
- RPMrpm
- Satellitessat
- Trip odometertripOdometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- GPS antenna cutgpsAntennaCut
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Jammingjamming
- Tamperingtampering
- Towingtow
[ Protocol-specific attributes ]
di · tagId
[ Other Ruptela models ]
Ruptela FM-ECO 4 FAQ
Which port does the Ruptela FM-ECO 4 use to connect to TrackeraX?
The Ruptela FM-ECO 4 uses the ruptela protocol and connects to port 6046 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Ruptela FM-ECO 4 send to the platform?
TrackeraX reads 26 parameters of the ruptela protocol on this device, for example: Battery voltage, Charging, Device temperature, Driver ID (RFID / iButton), Fault codes (DTC). Each one can become a sensor or an alert.
Can I send commands to the Ruptela FM-ECO 4 from TrackeraX?
Yes. From the map or the device page you can send 9 command types to the Ruptela FM-ECO 4, including: Engine stop, Engine resume, Output control, Firmware version, Configuration.
Which alarms does the Ruptela FM-ECO 4 report?
TrackeraX recognizes these ruptela alarms: Accident, GPS antenna cut, Harsh acceleration, Harsh braking, Jamming. Any of them can become an email, push or webhook notification.
How do I add the Ruptela FM-ECO 4 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6046 and create it in TrackeraX with its IMEI, choosing the Ruptela FM-ECO 4 model.
Try the FM-ECO 4 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

