Sprint3X protocol on TrackeraX
The Sprint3X protocol is a GPS tracker that works with TrackeraX over the sprint3x protocol on port 8023. From the platform it accepts custom commands. The server decodes 30 alarm types from this protocol, such as accident, door and fall.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 8023 (sprint3x protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Sprint3X protocol model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the sprint3x protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Battery voltagebattery
- Battery levelbatteryLevel
- Blockedblocked
- Cardcard
- Chargingcharge
- Coolant temperaturecoolantTemp
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Driving timedrivingTime
- Engine loadengineLoad
- Fuelfuel
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- Geofencegeofence
- HDOPhdop
- Engine hourshours
- Humidityhumidity
- SIM ICCIDiccid
- Ignitionignition
- Photoimage
- Digital inputsinput
- Motionmotion
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Visible satellitessatVisible
- Stepssteps
- Throttlethrottle
- VINvin
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Accidentaccident
- Doordoor
- FallfallDown
- Fatigue drivingfatigueDriving
- Faultfault
- Fuel leakfuelLeak
- Geofencegeofence
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Idlingidle
- Jammingjamming
- Lane changelaneChange
- Locklock
- Low batterylowBattery
- Low powerlowPower
- Movementmovement
- Overspeedoverspeed
- Power cutpowerCut
- Power offpowerOff
- Power onpowerOn
- Removalremoving
- SOSsos
- Tamperingtampering
- Temperaturetemperature
- Towingtow
- Unlockunlock
- Vibrationvibration
[ Protocol-specific attributes ]
absoluteCapacity · adcId · alarmJimi · barcode · batteryCell · batteryHealth · batteryStatus · batteryTemp · batteryVersion · bootReason · cameraChannelsBuiltin · cameraChannelsPeripheral · cameraStatus · cardStatus · chargeVoltage · clock · controllerFault · controllerStatus · current · currentChargeInterval · cycleIndex · dataDetails · dataType · deviceVersion · dltData · dltStatus · dltTime · dtcCount · engineStatus · eventData · eventFiles · externalBatteryCharge · externalBatteryCycles · externalBatteryLevel · fuelCapacitive · fuelConsumptionRate · fuelPulse · fuelSensorId · fuelTank · fuelUnit and 30 more
Sprint3X protocol FAQ
Which port does the Sprint3X protocol use to connect to TrackeraX?
The Sprint3X protocol uses the sprint3x protocol and connects to port 8023 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Sprint3X protocol send to the platform?
TrackeraX reads 38 parameters of the sprint3x protocol on this device, for example: Armed, Battery voltage, Battery level, Blocked, Card. Each one can become a sensor or an alert.
Which alarms does the Sprint3X protocol report?
TrackeraX recognizes these sprint3x alarms: Accident, Door, Fall, Fatigue driving, Fault. Any of them can become an email, push or webhook notification.
How do I add the Sprint3X protocol to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 8023 and create it in TrackeraX with its IMEI, choosing the Sprint3X protocol model.
Try the Sprint3X protocol on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

