[ GPS device ]

Starlink TITAN on TrackeraX

The Starlink TITAN is a GPS tracker that works with TrackeraX over the starlink protocol on port 6136. From the platform it accepts custom commands. The server decodes 8 alarm types from this protocol, such as geofence entry, geofence exit and jamming.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6136 (starlink protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Starlink TITAN model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the starlink protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Armedarmed
  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Device temperaturedeviceTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Fuelfuel
  • Engine hourshours
  • Ignitionignition
  • Odometerodometer
  • PDOPpdop
  • External powerpower
  • GSM signalrssi
  • Satellitessat
  • Visible satellitessatVisible

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Jammingjamming
  • Low batterylowBattery
  • Overspeedoverspeed
  • Power cutpowerCut
  • SOSsos
  • Towingtow

[ Protocol-specific attributes ]

batteryHealth · destination · external · fuel2 · reason · sensor · sensor1State · sensor2State · starter

[ Other Starlink models ]

Starlink TITAN FAQ

Which port does the Starlink TITAN use to connect to TrackeraX?

The Starlink TITAN uses the starlink protocol and connects to port 6136 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Starlink TITAN send to the platform?

TrackeraX reads 17 parameters of the starlink protocol on this device, for example: Armed, Battery voltage, Battery level, Device temperature, Driver ID (RFID / iButton). Each one can become a sensor or an alert.

Which alarms does the Starlink TITAN report?

TrackeraX recognizes these starlink alarms: Geofence entry, Geofence exit, Jamming, Low battery, Overspeed. Any of them can become an email, push or webhook notification.

How do I add the Starlink TITAN to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6136 and create it in TrackeraX with its IMEI, choosing the Starlink TITAN model.

Try the TITAN on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.