[ GPS device ]

Suntech Suntech2 (secondary port) on TrackeraX

The Suntech Suntech2 (secondary port) is a GPS tracker that works with TrackeraX over the suntech2 protocol on port 6300. From the platform it accepts custom commands. The server decodes 15 alarm types from this protocol, such as accident, door and geofence entry.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6300 (suntech2 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Suntech Suntech2 (secondary port) model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the suntech2 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Driver ID (RFID / iButton)driverUniqueId
  • Fuelfuel
  • G-sensorgSensor
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • Motionmotion
  • Odometerodometer
  • Digital outputsoutput
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Firmware versionversionFw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Doordoor
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Jammingjamming
  • Low batterylowBattery
  • Movementmovement
  • Overspeedoverspeed
  • Parkingparking
  • Power cutpowerCut
  • Power restoredpowerRestored
  • SOSsos
  • Vibrationvibration

[ Protocol-specific attributes ]

alertData · alertId · alertModifier · assign · drivingQuality · fuel1 · fuel2 · journey · mode · reason · serial · tag

[ Other Suntech models ]

Suntech Suntech2 (secondary port) FAQ

Which port does the Suntech Suntech2 (secondary port) use to connect to TrackeraX?

The Suntech Suntech2 (secondary port) uses the suntech2 protocol and connects to port 6300 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Suntech Suntech2 (secondary port) send to the platform?

TrackeraX reads 20 parameters of the suntech2 protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Fuel, G-sensor, Engine hours. Each one can become a sensor or an alert.

Which alarms does the Suntech Suntech2 (secondary port) report?

TrackeraX recognizes these suntech2 alarms: Accident, Door, Geofence entry, Geofence exit, Harsh acceleration. Any of them can become an email, push or webhook notification.

How do I add the Suntech Suntech2 (secondary port) to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6300 and create it in TrackeraX with its IMEI, choosing the Suntech Suntech2 (secondary port) model.

Try the Suntech2 (secondary port) on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.