T57 protocol devices on TrackeraX
The T57 protocol devices is a GPS tracker that works with TrackeraX over the t57 protocol on port 6155. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6155 (t57 protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the T57 protocol devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the t57 protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
T57 protocol devices FAQ
Which port does the T57 protocol devices use to connect to TrackeraX?
The T57 protocol devices uses the t57 protocol and connects to port 6155 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the T57 protocol devices send to the platform?
TrackeraX reads 1 parameters of the t57 protocol on this device, for example: Battery voltage. Each one can become a sensor or an alert.
How do I add the T57 protocol devices to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6155 and create it in TrackeraX with its IMEI, choosing the T57 protocol devices model.
Try the T57 protocol devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

