[ GPS device ]

Techto Cruz protocol on TrackeraX

The Techto Cruz protocol is a GPS tracker that works with TrackeraX over the techtocruz protocol on port 6303. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as overspeed.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6303 (techtocruz protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Techto Cruz protocol model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the techtocruz protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Ignitionignition
  • Odometerodometer
  • External powerpower
  • GSM signalrssi
  • Satellitessat

[ Alarms the protocol can report ]

  • Overspeedoverspeed

[ Protocol-specific attributes ]

registration

Techto Cruz protocol FAQ

Which port does the Techto Cruz protocol use to connect to TrackeraX?

The Techto Cruz protocol uses the techtocruz protocol and connects to port 6303 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Techto Cruz protocol send to the platform?

TrackeraX reads 7 parameters of the techtocruz protocol on this device, for example: Battery voltage, Charging, Ignition, Odometer, External power. Each one can become a sensor or an alert.

Which alarms does the Techto Cruz protocol report?

TrackeraX recognizes these techtocruz alarms: Overspeed. Any of them can become an email, push or webhook notification.

How do I add the Techto Cruz protocol to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6303 and create it in TrackeraX with its IMEI, choosing the Techto Cruz protocol model.

Try the Techto Cruz protocol on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.