[ GPS device ]

Telic Picotrack on TrackeraX

The Telic Picotrack is a GPS tracker that works with TrackeraX over the telic protocol on port 6067. From the platform it accepts custom commands. The server decodes 7 alarm types from this protocol, such as geofence entry, geofence exit and low battery.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6067 (telic protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Telic Picotrack model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the telic protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Ignitionignition
  • Satellitessat

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Low batterylowBattery
  • Movementmovement
  • Power offpowerOff
  • Power onpowerOn
  • SOSsos

[ Other Telic models ]

[ Other devices on the telic protocol ]

Telic Picotrack FAQ

Which port does the Telic Picotrack use to connect to TrackeraX?

The Telic Picotrack uses the telic protocol and connects to port 6067 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Telic Picotrack send to the platform?

TrackeraX reads 3 parameters of the telic protocol on this device, for example: Battery voltage, Ignition, Satellites. Each one can become a sensor or an alert.

Which alarms does the Telic Picotrack report?

TrackeraX recognizes these telic alarms: Geofence entry, Geofence exit, Low battery, Movement, Power off. Any of them can become an email, push or webhook notification.

How do I add the Telic Picotrack to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6067 and create it in TrackeraX with its IMEI, choosing the Telic Picotrack model.

Try the Picotrack on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.