[ GPS device ]

Teltonika ATC774 on TrackeraX

The Teltonika ATC774 is a GPS tracker that works with TrackeraX over the teltonika protocol on port 6027. From the platform it supports engine stop, engine resume and request photo, plus custom commands. The server decodes 11 alarm types from this protocol, such as accident, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6027 (teltonika protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Teltonika ATC774 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom
  • serialserial
  • Request photorequestPhoto
  • Request videorequestVideo

[ Data reported by the teltonika protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Coolant temperaturecoolantTemp
  • Device temperaturedeviceTemp
  • Doordoor
  • Driver ID (RFID / iButton)driverUniqueId
  • Fault codes (DTC)dtcs
  • energyenergy
  • energyLevelenergyLevel
  • Engine loadengineLoad
  • Engine temperatureengineTemp
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel levelfuelLevel
  • Fuel usedfuelUsed
  • HDOPhdop
  • SIM ICCIDiccid
  • Ignitionignition
  • Photoimage
  • Motionmotion
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Odometerodometer
  • Mobile operatoroperator
  • PDOPpdop
  • External powerpower
  • Roamingroaming
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle
  • Trip odometertripOdometer
  • VDOPvdop
  • VINvin

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Idlingidle
  • Jammingjamming
  • Power cutpowerCut
  • SOSsos
  • Towingtow

[ Protocol-specific attributes ]

axisX · axisY · axisZ · axle · batteryCurrent · beacon · bleCombinedFuel · bleTemp1 · bleTemp2 · bleTemp3 · bleTemp4 · button · cid2g · cid4g · combinedFuel · dataMode · di1 · di2 · di3 · di4 · eyePitch1 · eyeRoll1 · eyeRoll2 · eyeRoll3 · eyeRoll4 · eyeTemp1 · eyeTemp2 · eyeTemp3 · eyeTemp4 · faultCount · hybridBatteryLevel · lac · loadTrailer · loadTruck · milDistance · networkType · priority · sleepMode · tag · tempProbe1 and 10 more

[ Other Teltonika models ]

[ Other devices on the teltonika protocol ]

Teltonika ATC774 FAQ

Which port does the Teltonika ATC774 use to connect to TrackeraX?

The Teltonika ATC774 uses the teltonika protocol and connects to port 6027 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Teltonika ATC774 send to the platform?

TrackeraX reads 39 parameters of the teltonika protocol on this device, for example: Battery voltage, Battery level, Coolant temperature, Device temperature, Door. Each one can become a sensor or an alert.

Can I send commands to the Teltonika ATC774 from TrackeraX?

Yes. From the map or the device page you can send 5 command types to the Teltonika ATC774, including: Engine stop, Engine resume, serial, Request photo, Request video.

Which alarms does the Teltonika ATC774 report?

TrackeraX recognizes these teltonika alarms: Accident, Geofence entry, Geofence exit, Harsh acceleration, Harsh braking. Any of them can become an email, push or webhook notification.

How do I add the Teltonika ATC774 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6027 and create it in TrackeraX with its IMEI, choosing the Teltonika ATC774 model.

Try the ATC774 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.