[ GPS device ]

TeraTrack / SKY IoT on TrackeraX

The TeraTrack / SKY IoT is a GPS tracker that works with TrackeraX over the teratrack protocol on port 6239. From the platform it accepts custom commands. The server decodes 1 alarm type from this protocol, such as low power.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6239 (teratrack protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the TeraTrack / SKY IoT model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the teratrack protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery levelbatteryLevel
  • Driver ID (RFID / iButton)driverUniqueId
  • Locklock
  • Odometerodometer
  • GSM signalrssi

[ Alarms the protocol can report ]

  • Low powerlowPower

[ Protocol-specific attributes ]

coverStatus · illegalCard · lockCutOff · lockRope · lockStatus · sealTampered

TeraTrack / SKY IoT FAQ

Which port does the TeraTrack / SKY IoT use to connect to TrackeraX?

The TeraTrack / SKY IoT uses the teratrack protocol and connects to port 6239 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the TeraTrack / SKY IoT send to the platform?

TrackeraX reads 5 parameters of the teratrack protocol on this device, for example: Battery level, Driver ID (RFID / iButton), Lock, Odometer, GSM signal. Each one can become a sensor or an alert.

Which alarms does the TeraTrack / SKY IoT report?

TrackeraX recognizes these teratrack alarms: Low power. Any of them can become an email, push or webhook notification.

How do I add the TeraTrack / SKY IoT to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6239 and create it in TrackeraX with its IMEI, choosing the TeraTrack / SKY IoT model.

Try the TeraTrack / SKY IoT on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.