[ GPS device ]

ThinkPower protocol devices on TrackeraX

The ThinkPower protocol devices is a GPS tracker that works with TrackeraX over the thinkpower protocol on port 6228. From the platform it accepts custom commands. The server decodes 4 alarm types from this protocol, such as low battery, removal and sos.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6228 (thinkpower protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the ThinkPower protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the thinkpower protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery

[ Alarms the protocol can report ]

  • Low batterylowBattery
  • Removalremoving
  • SOSsos
  • Tamperingtampering

[ Other ThinkPower models ]

ThinkPower protocol devices FAQ

Which port does the ThinkPower protocol devices use to connect to TrackeraX?

The ThinkPower protocol devices uses the thinkpower protocol and connects to port 6228 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the ThinkPower protocol devices send to the platform?

TrackeraX reads 1 parameters of the thinkpower protocol on this device, for example: Battery voltage. Each one can become a sensor or an alert.

Which alarms does the ThinkPower protocol devices report?

TrackeraX recognizes these thinkpower alarms: Low battery, Removal, SOS, Tampering. Any of them can become an email, push or webhook notification.

How do I add the ThinkPower protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6228 and create it in TrackeraX with its IMEI, choosing the ThinkPower protocol devices model.

Try the ThinkPower protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.