TLT MP80 on TrackeraX
The TLT MP80 is a GPS tracker that works with TrackeraX over the tlt2h protocol on port 6030. From the platform it accepts custom commands. The server decodes 9 alarm types from this protocol, such as geofence entry, geofence exit and low battery.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6030 (tlt2h protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the TLT MP80 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the tlt2h protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Doordoor
- Ignitionignition
- External powerpower
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- Low batterylowBattery
- Low powerlowPower
- Overspeedoverspeed
- Power cutpowerCut
- SOSsos
- Towingtow
- Vibrationvibration
[ Other TLT models ]
[ Other devices on the tlt2h protocol ]
TLT MP80 FAQ
Which port does the TLT MP80 use to connect to TrackeraX?
The TLT MP80 uses the tlt2h protocol and connects to port 6030 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the TLT MP80 send to the platform?
TrackeraX reads 6 parameters of the tlt2h protocol on this device, for example: Battery voltage, Door, Ignition, External power. Each one can become a sensor or an alert.
Which alarms does the TLT MP80 report?
TrackeraX recognizes these tlt2h alarms: Geofence entry, Geofence exit, Low battery, Low power, Overspeed. Any of them can become an email, push or webhook notification.
How do I add the TLT MP80 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6030 and create it in TrackeraX with its IMEI, choosing the TLT MP80 model.
Try the MP80 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

