[ GPS device ]

TLV protocol devices on TrackeraX

The TLV protocol devices is a GPS tracker that works with TrackeraX over the tlv protocol on port 6146. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6146 (tlv protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the TLV protocol devices model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the tlv protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Satellitessat

TLV protocol devices FAQ

Which port does the TLV protocol devices use to connect to TrackeraX?

The TLV protocol devices uses the tlv protocol and connects to port 6146 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the TLV protocol devices send to the platform?

TrackeraX reads 1 parameters of the tlv protocol on this device, for example: Satellites. Each one can become a sensor or an alert.

How do I add the TLV protocol devices to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6146 and create it in TrackeraX with its IMEI, choosing the TLV protocol devices model.

Try the TLV protocol devices on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.