[ GPS device ]

Topflytech T800X on TrackeraX

The Topflytech T800X is a GPS tracker that works with TrackeraX over the t800x protocol on port 6094. From the platform it accepts custom commands. The server decodes 17 alarm types from this protocol, such as fall, geofence entry and geofence exit.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6094 (t800x protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Topflytech T800X model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the t800x protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Coolant temperaturecoolantTemp
  • Device temperaturedeviceTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel levelfuelLevel
  • Fuel usedfuelUsed
  • G-sensorgSensor
  • SIM ICCIDiccid
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • Mobile operatoroperator
  • Digital outputsoutput
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • FallfallDown
  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Jammingjamming
  • Low batterylowBattery
  • Low powerlowPower
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power restoredpowerRestored
  • Removalremoving
  • SOSsos
  • Tamperingtampering
  • Towingtow
  • Vibrationvibration

[ Protocol-specific attributes ]

ac · airInput · airPressure · airTemp · alarmCode · lightSensor · networkBand · networkTechnology · solarPanel · tag

[ Other Topflytech models ]

Topflytech T800X FAQ

Which port does the Topflytech T800X use to connect to TrackeraX?

The Topflytech T800X uses the t800x protocol and connects to port 6094 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Topflytech T800X send to the platform?

TrackeraX reads 25 parameters of the t800x protocol on this device, for example: Battery voltage, Battery level, Coolant temperature, Device temperature, Driver ID (RFID / iButton). Each one can become a sensor or an alert.

Which alarms does the Topflytech T800X report?

TrackeraX recognizes these t800x alarms: Fall, Geofence entry, Geofence exit, Harsh acceleration, Harsh braking. Any of them can become an email, push or webhook notification.

How do I add the Topflytech T800X to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6094 and create it in TrackeraX with its IMEI, choosing the Topflytech T800X model.

Try the T800X on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.