[ GPS device ]

Topten MT05S on TrackeraX

The Topten MT05S is a GPS tracker that works with TrackeraX over the meiligao protocol on port 6009. From the platform it supports engine stop, engine resume and movement alarm, plus custom commands. The server decodes 14 alarm types from this protocol, such as accident, fatigue driving and geofence.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6009 (meiligao protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Topten MT05S model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Movement alarmmovementAlarm
  • Request positionpositionSingle
  • Reporting intervalpositionPeriodic
  • Set time zonesetTimezone
  • Reboot devicerebootDevice
  • Output controloutputControl
  • Custom commandcustom
  • Request photorequestPhoto

[ Data reported by the meiligao protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Cardcard
  • Coolant temperaturecoolantTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Fault codes (DTC)dtcs
  • Engine loadengineLoad
  • Fuel consumptionfuelConsumption
  • Fuel usedfuelUsed
  • HDOPhdop
  • Photoimage
  • OBD speedobdSpeed
  • Odometerodometer
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • Fatigue drivingfatigueDriving
  • Geofencegeofence
  • Geofence entrygeofenceEnter
  • GPS antenna cutgpsAntennaCut
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Idlingidle
  • Low batterylowBattery
  • Movementmovement
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power offpowerOff
  • SOSsos

[ Protocol-specific attributes ]

averageFuelConsumption · averageHotStartTime · averageSpeed · drivingRange · hardAccelerationCount · hardBrakingCount · historyHighestRpm · historyHighestSpeed · singleFuelConsumption · totalDrivingTime · totalHarshAccerleration · totalHarshBrake · totalIdlingTime · totalIgnitionNo

[ Other Topten models ]

[ Other devices on the meiligao protocol ]

Topten MT05S FAQ

Which port does the Topten MT05S use to connect to TrackeraX?

The Topten MT05S uses the meiligao protocol and connects to port 6009 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Topten MT05S send to the platform?

TrackeraX reads 19 parameters of the meiligao protocol on this device, for example: Battery voltage, Card, Coolant temperature, Driver ID (RFID / iButton), Fault codes (DTC). Each one can become a sensor or an alert.

Can I send commands to the Topten MT05S from TrackeraX?

Yes. From the map or the device page you can send 9 command types to the Topten MT05S, including: Engine stop, Engine resume, Movement alarm, Request position, Reporting interval.

Which alarms does the Topten MT05S report?

TrackeraX recognizes these meiligao alarms: Accident, Fatigue driving, Geofence, Geofence entry, GPS antenna cut. Any of them can become an email, push or webhook notification.

How do I add the Topten MT05S to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6009 and create it in TrackeraX with its IMEI, choosing the Topten MT05S model.

Try the Topten MT05S on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.