TZone Digital AVL03 on TrackeraX
The TZone Digital AVL03 is a GPS tracker that works with TrackeraX over the totem protocol on port 6007. From the platform it supports engine stop, engine resume and factory reset, plus custom commands. The server decodes 15 alarm types from this protocol, such as geofence entry, geofence exit and gps antenna cut.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6007 (totem protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the TZone Digital AVL03 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Factory resetfactoryReset
- Firmware versiongetVersion
- Request positionpositionSingle
- Reboot devicerebootDevice
- Custom commandcustom
[ Data reported by the totem protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- GPS antennaantenna
- Battery voltagebattery
- Chargingcharge
- Coolant temperaturecoolantTemp
- Driver ID (RFID / iButton)driverUniqueId
- Engine loadengineLoad
- Fuelfuel
- Fuel consumptionfuelConsumption
- Fuel usedfuelUsed
- HDOPhdop
- Ignitionignition
- OBD speedobdSpeed
- Odometerodometer
- PDOPpdop
- External powerpower
- RPMrpm
- Satellitessat
- Throttlethrottle
- VDOPvdop
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- IO elements (io1, io2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Geofence entrygeofenceEnter
- Geofence exitgeofenceExit
- GPS antenna cutgpsAntennaCut
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Idlingidle
- Low batterylowBattery
- Low powerlowPower
- Overspeedoverspeed
- Parkingparking
- Power cutpowerCut
- Power restoredpowerRestored
- SOSsos
- Towingtow
- Vibrationvibration
[ Protocol-specific attributes ]
intakeTemp
[ Other Tzone Digital models ]
[ Other devices on the totem protocol ]
TZone Digital AVL03 FAQ
Which port does the TZone Digital AVL03 use to connect to TrackeraX?
The TZone Digital AVL03 uses the totem protocol and connects to port 6007 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the TZone Digital AVL03 send to the platform?
TrackeraX reads 24 parameters of the totem protocol on this device, for example: GPS antenna, Battery voltage, Charging, Coolant temperature, Driver ID (RFID / iButton). Each one can become a sensor or an alert.
Can I send commands to the TZone Digital AVL03 from TrackeraX?
Yes. From the map or the device page you can send 6 command types to the TZone Digital AVL03, including: Engine stop, Engine resume, Factory reset, Firmware version, Request position.
Which alarms does the TZone Digital AVL03 report?
TrackeraX recognizes these totem alarms: Geofence entry, Geofence exit, GPS antenna cut, Harsh acceleration, Harsh braking. Any of them can become an email, push or webhook notification.
How do I add the TZone Digital AVL03 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6007 and create it in TrackeraX with its IMEI, choosing the TZone Digital AVL03 model.
Try the TZone Digital AVL03 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

