[ GPS device ]

Ulbotech T380 on TrackeraX

The Ulbotech T380 is a GPS tracker that works with TrackeraX over the ulbotech protocol on port 6072. From the platform it accepts custom commands. The server decodes 5 alarm types from this protocol, such as geofence, movement and overspeed.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6072 (ulbotech protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Ulbotech T380 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the ulbotech protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Driver ID (RFID / iButton)driverUniqueId
  • Fuel consumptionfuelConsumption
  • HDOPhdop
  • Ignitionignition
  • Odometerodometer
  • External powerpower
  • VINvin

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • IO elements (io1, io2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Geofencegeofence
  • Movementmovement
  • Overspeedoverspeed
  • Power offpowerOff
  • SOSsos

[ Protocol-specific attributes ]

authorized · can · eventMask · fatigueDriving · geofenceAlarm · geofenceIn · harshCourse · highRpm · longIdle · noWarmUp · pid · rapidAcceleration · roughBraking · roughTerrain

[ Other Ulbotech models ]

Ulbotech T380 FAQ

Which port does the Ulbotech T380 use to connect to TrackeraX?

The Ulbotech T380 uses the ulbotech protocol and connects to port 6072 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Ulbotech T380 send to the platform?

TrackeraX reads 11 parameters of the ulbotech protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Fuel consumption, HDOP, Ignition. Each one can become a sensor or an alert.

Which alarms does the Ulbotech T380 report?

TrackeraX recognizes these ulbotech alarms: Geofence, Movement, Overspeed, Power off, SOS. Any of them can become an email, push or webhook notification.

How do I add the Ulbotech T380 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6072 and create it in TrackeraX with its IMEI, choosing the Ulbotech T380 model.

Try the T380 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.