VNET TG102E on TrackeraX
The VNET TG102E is a GPS tracker. In TrackeraX it connects over the vnet protocol on port 6205 and accepts 1 command from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6205 (vnet protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the VNET TG102E model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the vnet protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Odometerodometer
- Satellitessat
[ Other VNET models ]
VNET TG102E FAQ
Which port does the VNET TG102E use to connect to TrackeraX?
The VNET TG102E uses the vnet protocol and connects to port 6205 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the VNET TG102E send to the platform?
TrackeraX reads 2 parameters of the vnet protocol on this device, for example: Odometer, Satellites. Each one can become a sensor or an alert.
How do I add the VNET TG102E to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6205 and create it in TrackeraX with its IMEI, choosing the VNET TG102E model.
Try the TG102E on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

