VTFMS protocol devices on TrackeraX
The VTFMS protocol devices is a GPS tracker that works with TrackeraX over the vtfms protocol on port 6145. From the platform it accepts custom commands. The server decodes 5 alarm types from this protocol, such as harsh acceleration, harsh braking and overspeed.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6145 (vtfms protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the VTFMS protocol devices model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the vtfms protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Chargingcharge
- Fuelfuel
- Engine hourshours
- Odometerodometer
- External powerpower
- GSM signalrssi
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
[ Alarms the protocol can report ]
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Overspeedoverspeed
- Power cutpowerCut
- Power restoredpowerRestored
[ Protocol-specific attributes ]
idleHours
VTFMS protocol devices FAQ
Which port does the VTFMS protocol devices use to connect to TrackeraX?
The VTFMS protocol devices uses the vtfms protocol and connects to port 6145 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the VTFMS protocol devices send to the platform?
TrackeraX reads 10 parameters of the vtfms protocol on this device, for example: Charging, Fuel, Engine hours, Odometer, External power. Each one can become a sensor or an alert.
Which alarms does the VTFMS protocol devices report?
TrackeraX recognizes these vtfms alarms: Harsh acceleration, Harsh braking, Overspeed, Power cut, Power restored. Any of them can become an email, push or webhook notification.
How do I add the VTFMS protocol devices to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6145 and create it in TrackeraX with its IMEI, choosing the VTFMS protocol devices model.
Try the VTFMS protocol devices on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

