WLI / Piccolo on TrackeraX
The WLI / Piccolo is a GPS tracker that works with TrackeraX over the wli protocol on port 6209. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6209 (wli protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the WLI / Piccolo model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the wli protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Odometerodometer
- External powerpower
[ Other devices on the wli protocol ]
WLI / Piccolo FAQ
Which port does the WLI / Piccolo use to connect to TrackeraX?
The WLI / Piccolo uses the wli protocol and connects to port 6209 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the WLI / Piccolo send to the platform?
TrackeraX reads 3 parameters of the wli protocol on this device, for example: Battery voltage, Odometer, External power. Each one can become a sensor or an alert.
How do I add the WLI / Piccolo to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6209 and create it in TrackeraX with its IMEI, choosing the WLI / Piccolo model.
Try the WLI / Piccolo on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

