Xexun TK201-2 on TrackeraX
The Xexun TK201-2 is a GPS tracker that works with TrackeraX over the xexun protocol on port 6006. From the platform it supports engine stop and engine resume, plus custom commands. The server decodes 3 alarm types from this protocol, such as low battery, movement and sos.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6006 (xexun protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Xexun TK201-2 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Custom commandcustom
[ Data reported by the xexun protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Ignitionignition
- External powerpower
- Satellitessat
[ Alarms the protocol can report ]
- Low batterylowBattery
- Movementmovement
- SOSsos
[ Protocol-specific attributes ]
number · serial · signal
[ Other Xexun models ]
Xexun TK201-2 FAQ
Which port does the Xexun TK201-2 use to connect to TrackeraX?
The Xexun TK201-2 uses the xexun protocol and connects to port 6006 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Xexun TK201-2 send to the platform?
TrackeraX reads 3 parameters of the xexun protocol on this device, for example: Ignition, External power, Satellites. Each one can become a sensor or an alert.
Can I send commands to the Xexun TK201-2 from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the Xexun TK201-2, including: Engine stop, Engine resume.
Which alarms does the Xexun TK201-2 report?
TrackeraX recognizes these xexun alarms: Low battery, Movement, SOS. Any of them can become an email, push or webhook notification.
How do I add the Xexun TK201-2 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6006 and create it in TrackeraX with its IMEI, choosing the Xexun TK201-2 model.
Try the TK201-2 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

