[ GPS device ]

Xirgo XT-2150C on TrackeraX

The Xirgo XT-2150C is a GPS tracker. In TrackeraX it connects over the xirgo protocol on port 6081 and accepts 2 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6081 (xirgo protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Xirgo XT-2150C model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output controloutputControl
  • Custom commandcustom

[ Data reported by the xirgo protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • HDOPhdop
  • Engine hourshours
  • SIM ICCIDiccid
  • Ignitionignition
  • Motionmotion
  • Odometerodometer
  • Digital outputsoutput
  • GSM signalrssi
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Idlingidle
  • Low batterylowBattery
  • Low powerlowPower
  • Overspeedoverspeed
  • Parkingparking
  • Power cutpowerCut
  • Power restoredpowerRestored
  • Removalremoving
  • Towingtow

[ Protocol-specific attributes ]

coolantLevel · coolantPressure · oilLevel · oilPressure · oilTemp

[ Other Xirgo models ]

Xirgo XT-2150C FAQ

Which port does the Xirgo XT-2150C use to connect to TrackeraX?

The Xirgo XT-2150C uses the xirgo protocol and connects to port 6081 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Xirgo XT-2150C send to the platform?

TrackeraX reads 16 parameters of the xirgo protocol on this device, for example: Battery voltage, Charging, Fuel, Fuel consumption, HDOP. Each one can become a sensor or an alert.

Can I send commands to the Xirgo XT-2150C from TrackeraX?

Yes. From the map or the device page you can send 1 command types to the Xirgo XT-2150C, including: Output control.

Which alarms does the Xirgo XT-2150C report?

TrackeraX recognizes these xirgo alarms: Harsh acceleration, Harsh braking, Idling, Low battery, Low power. Any of them can become an email, push or webhook notification.

How do I add the Xirgo XT-2150C to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6081 and create it in TrackeraX with its IMEI, choosing the Xirgo XT-2150C model.

Try the XT-2150C on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.