[ GPS device ]

YWT V208 on TrackeraX

The YWT V208 is a GPS tracker that works with TrackeraX over the ywt protocol on port 6035. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6035 (ywt protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the YWT V208 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the ywt protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Satellitessat

YWT V208 FAQ

Which port does the YWT V208 use to connect to TrackeraX?

The YWT V208 uses the ywt protocol and connects to port 6035 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the YWT V208 send to the platform?

TrackeraX reads 1 parameters of the ywt protocol on this device, for example: Satellites. Each one can become a sensor or an alert.

How do I add the YWT V208 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6035 and create it in TrackeraX with its IMEI, choosing the YWT V208 model.

Try the V208 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.