[ GPS device ]

ADM ADM700 3G on TrackeraX

The ADM ADM700 3G is a GPS tracker that works with TrackeraX over the adm protocol on port 6092. From the platform it supports device status, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6092 (adm protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the ADM ADM700 3G model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Device statusgetDeviceStatus
  • Custom commandcustom

[ Data reported by the adm protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Accelerationacceleration
  • Battery voltagebattery
  • HDOPhdop
  • Humidityhumidity
  • Odometerodometer
  • External powerpower
  • Satellitessat
  • Firmware versionversionFw

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Counters (count1, count2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Protocol-specific attributes ]

can · illumination

[ Other ADM models ]

[ Other devices on the adm protocol ]

ADM ADM700 3G FAQ

Which port does the ADM ADM700 3G use to connect to TrackeraX?

The ADM ADM700 3G uses the adm protocol and connects to port 6092 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the ADM ADM700 3G send to the platform?

TrackeraX reads 12 parameters of the adm protocol on this device, for example: Acceleration, Battery voltage, HDOP, Humidity, Odometer. Each one can become a sensor or an alert.

Can I send commands to the ADM ADM700 3G from TrackeraX?

Yes. From the map or the device page you can send 1 command types to the ADM ADM700 3G, including: Device status.

How do I add the ADM ADM700 3G to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6092 and create it in TrackeraX with its IMEI, choosing the ADM ADM700 3G model.

Try the ADM700 3G on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.