Neomatica ADM P50 LTE on TrackeraX
The Neomatica ADM P50 LTE is a GPS tracker that works with TrackeraX over the adm protocol on port 6092. From the platform it supports device status, plus custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6092 (adm protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Neomatica ADM P50 LTE model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Device statusgetDeviceStatus
- Custom commandcustom
[ Data reported by the adm protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Accelerationacceleration
- Battery voltagebattery
- HDOPhdop
- Humidityhumidity
- Odometerodometer
- External powerpower
- Satellitessat
- Firmware versionversionFw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Counters (count1, count2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Protocol-specific attributes ]
can · illumination
[ Other Neomatica models ]
[ Other devices on the adm protocol ]
Neomatica ADM P50 LTE FAQ
Which port does the Neomatica ADM P50 LTE use to connect to TrackeraX?
The Neomatica ADM P50 LTE uses the adm protocol and connects to port 6092 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Neomatica ADM P50 LTE send to the platform?
TrackeraX reads 12 parameters of the adm protocol on this device, for example: Acceleration, Battery voltage, HDOP, Humidity, Odometer. Each one can become a sensor or an alert.
Can I send commands to the Neomatica ADM P50 LTE from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the Neomatica ADM P50 LTE, including: Device status.
How do I add the Neomatica ADM P50 LTE to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6092 and create it in TrackeraX with its IMEI, choosing the Neomatica ADM P50 LTE model.
Try the ADM P50 LTE on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

