[ GPS device ]

Arusnavi Beacon on TrackeraX

The Arusnavi Beacon is an asset tracker that works with TrackeraX over the arnavi protocol on port 6100. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6100 (arnavi protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Arusnavi Beacon model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the arnavi protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Engine temperatureengineTemp
  • Fuelfuel
  • Fuel levelfuelLevel
  • Fuel usedfuelUsed
  • HDOPhdop
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • OBD speedobdSpeed
  • Odometerodometer
  • External powerpower
  • RPMrpm
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Protocol-specific attributes ]

adBlueLevel · axleLoad · callButton · canStatus · freq · llsLevel · llsTemp · motionStatus · pulses · tachographOdometer · tachographPower

[ Other Arusnavi models ]

Arusnavi Beacon FAQ

Which port does the Arusnavi Beacon use to connect to TrackeraX?

The Arusnavi Beacon uses the arnavi protocol and connects to port 6100 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Arusnavi Beacon send to the platform?

TrackeraX reads 19 parameters of the arnavi protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Engine load, Engine temperature, Fuel. Each one can become a sensor or an alert.

How do I add the Arusnavi Beacon to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6100 and create it in TrackeraX with its IMEI, choosing the Arusnavi Beacon model.

Try the Beacon on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.