Arusnavi Integral 1 on TrackeraX
The Arusnavi Integral 1 is a GPS tracker that works with TrackeraX over the arnavi protocol on port 6100. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6100 (arnavi protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Arusnavi Integral 1 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the arnavi protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Driver ID (RFID / iButton)driverUniqueId
- Engine loadengineLoad
- Engine temperatureengineTemp
- Fuelfuel
- Fuel levelfuelLevel
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- Ignitionignition
- Digital inputsinput
- OBD speedobdSpeed
- Odometerodometer
- External powerpower
- RPMrpm
- Satellitessat
- Throttlethrottle
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Protocol-specific attributes ]
adBlueLevel · axleLoad · callButton · canStatus · freq · llsLevel · llsTemp · motionStatus · pulses · tachographOdometer · tachographPower
[ Other Arusnavi models ]
Arusnavi Integral 1 FAQ
Which port does the Arusnavi Integral 1 use to connect to TrackeraX?
The Arusnavi Integral 1 uses the arnavi protocol and connects to port 6100 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Arusnavi Integral 1 send to the platform?
TrackeraX reads 19 parameters of the arnavi protocol on this device, for example: Battery voltage, Driver ID (RFID / iButton), Engine load, Engine temperature, Fuel. Each one can become a sensor or an alert.
How do I add the Arusnavi Integral 1 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6100 and create it in TrackeraX with its IMEI, choosing the Arusnavi Integral 1 model.
Try the Integral 1 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

