[ GPS device ]

BCE FM-500 BLUE on TrackeraX

The BCE FM-500 BLUE is a vehicle tracker. In TrackeraX it connects over the bce protocol on port 6080 and accepts 2 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6080 (bce protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the BCE FM-500 BLUE model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output controloutputControl
  • Custom commandcustom

[ Data reported by the bce protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Axle weightaxleWeight
  • Coolant temperaturecoolantTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel usedfuelUsed
  • HDOPhdop
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Service odometerserviceOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Temperature sensors (temp1, temp2…)

[ Protocol-specific attributes ]

driver1 · driver2 · fuel1 · fuel2 · fuel3 · fuel4 · fuelTemp1 · fuelTemp2 · fuelTemp3 · fuelTemp4 · maxAcceleration · maxBraking · maxCornering

[ Other BCE models ]

BCE FM-500 BLUE FAQ

Which port does the BCE FM-500 BLUE use to connect to TrackeraX?

The BCE FM-500 BLUE uses the bce protocol and connects to port 6080 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the BCE FM-500 BLUE send to the platform?

TrackeraX reads 19 parameters of the bce protocol on this device, for example: Axle weight, Coolant temperature, Driver ID (RFID / iButton), Engine load, Fuel. Each one can become a sensor or an alert.

Can I send commands to the BCE FM-500 BLUE from TrackeraX?

Yes. From the map or the device page you can send 1 command types to the BCE FM-500 BLUE, including: Output control.

How do I add the BCE FM-500 BLUE to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6080 and create it in TrackeraX with its IMEI, choosing the BCE FM-500 BLUE model.

Try the BCE FM-500 BLUE on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.