[ GPS device ]

BCE FMS500 XtCAN on TrackeraX

The BCE FMS500 XtCAN is a GPS tracker that works with TrackeraX over the bce protocol on port 6080. From the platform it supports output control, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6080 (bce protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the BCE FMS500 XtCAN model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output controloutputControl
  • Custom commandcustom

[ Data reported by the bce protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Axle weightaxleWeight
  • Coolant temperaturecoolantTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel usedfuelUsed
  • HDOPhdop
  • Engine hourshours
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Service odometerserviceOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • Temperature sensors (temp1, temp2…)

[ Protocol-specific attributes ]

driver1 · driver2 · fuel1 · fuel2 · fuel3 · fuel4 · fuelTemp1 · fuelTemp2 · fuelTemp3 · fuelTemp4 · maxAcceleration · maxBraking · maxCornering

[ Other BCE models ]

BCE FMS500 XtCAN FAQ

Which port does the BCE FMS500 XtCAN use to connect to TrackeraX?

The BCE FMS500 XtCAN uses the bce protocol and connects to port 6080 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the BCE FMS500 XtCAN send to the platform?

TrackeraX reads 19 parameters of the bce protocol on this device, for example: Axle weight, Coolant temperature, Driver ID (RFID / iButton), Engine load, Fuel. Each one can become a sensor or an alert.

Can I send commands to the BCE FMS500 XtCAN from TrackeraX?

Yes. From the map or the device page you can send 1 command types to the BCE FMS500 XtCAN, including: Output control.

How do I add the BCE FMS500 XtCAN to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6080 and create it in TrackeraX with its IMEI, choosing the BCE FMS500 XtCAN model.

Try the FMS500 XtCAN on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.