[ GPS device ]

Cantrack T80 OBD on TrackeraX

The Cantrack T80 OBD is an OBD tracker that works with TrackeraX over the vt200 protocol on port 6143. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6143 (vt200 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Cantrack T80 OBD model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the vt200 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Driving timedrivingTime
  • Fuel consumptionfuelConsumption
  • Ignitionignition
  • Odometerodometer
  • GSM signalrssi
  • Satellitessat
  • Trip odometertripOdometer

[ Protocol-specific attributes ]

emergencyRefueling · hardAccelerationCount · hardBrakingCount · hardCorneringCount · idleFuel · idleTime · laneChangeCount · maxRpm · maxSpeed · maxTemp · overheatCount · overspeedCount · tripEnd · tripStart

[ Other Cantrack models ]

[ Other devices on the vt200 protocol ]

Cantrack T80 OBD FAQ

Which port does the Cantrack T80 OBD use to connect to TrackeraX?

The Cantrack T80 OBD uses the vt200 protocol and connects to port 6143 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Cantrack T80 OBD send to the platform?

TrackeraX reads 7 parameters of the vt200 protocol on this device, for example: Driving time, Fuel consumption, Ignition, Odometer, GSM signal. Each one can become a sensor or an alert.

How do I add the Cantrack T80 OBD to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6143 and create it in TrackeraX with its IMEI, choosing the Cantrack T80 OBD model.

Try the Cantrack T80 OBD on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.