[ GPS device ]

Istartek VT200 on TrackeraX

The Istartek VT200 is a vehicle tracker. It comes with an internal battery, a 1-Wire interface and an RS-232 port. It is rated IP66 against dust and water. In TrackeraX it connects over the vt200 protocol on port 6143 and accepts 1 command from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6143 (vt200 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Istartek VT200 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • 1-Wire
  • Internal battery
  • RS-232
  • IP66

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the vt200 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Driving timedrivingTime
  • Fuel consumptionfuelConsumption
  • Ignitionignition
  • Odometerodometer
  • GSM signalrssi
  • Satellitessat
  • Trip odometertripOdometer

[ Protocol-specific attributes ]

emergencyRefueling · hardAccelerationCount · hardBrakingCount · hardCorneringCount · idleFuel · idleTime · laneChangeCount · maxRpm · maxSpeed · maxTemp · overheatCount · overspeedCount · tripEnd · tripStart

[ Other Istartek models ]

[ Other devices on the vt200 protocol ]

Istartek VT200 FAQ

Which port does the Istartek VT200 use to connect to TrackeraX?

The Istartek VT200 uses the vt200 protocol and connects to port 6143 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Istartek VT200 send to the platform?

TrackeraX reads 7 parameters of the vt200 protocol on this device, for example: Driving time, Fuel consumption, Ignition, Odometer, GSM signal. Each one can become a sensor or an alert.

How do I add the Istartek VT200 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6143 and create it in TrackeraX with its IMEI, choosing the Istartek VT200 model.

Try the VT200 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.