Cellocator CelloTrack Solar on TrackeraX
The Cellocator CelloTrack Solar is an asset tracker with 4G LTE. It has an internal battery and a solar panel. It is rated IP67 against dust and water. In TrackeraX it connects over the cellocator protocol on port 6033 and accepts 2 commands from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6033 (cellocator protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Cellocator CelloTrack Solar model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Hardware and connectivity ]
- Internal battery
- 4G LTE
- Solar panel
- IP67
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output controloutputControl
- Custom commandcustom
[ Data reported by the cellocator protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Chargingcharge
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Ignitionignition
- Digital inputsinput
- Odometerodometer
- Satellitessat
- Firmware versionversionFw
- Hardware versionversionHw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- IO elements (io1, io2…)
[ Alarms the protocol can report ]
- Low powerlowPower
- Power cutpowerCut
- SOSsos
[ Protocol-specific attributes ]
mode
[ Other Cellocator models ]
[ Other devices on the cellocator protocol ]
Cellocator CelloTrack Solar FAQ
Which port does the Cellocator CelloTrack Solar use to connect to TrackeraX?
The Cellocator CelloTrack Solar uses the cellocator protocol and connects to port 6033 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Cellocator CelloTrack Solar send to the platform?
TrackeraX reads 11 parameters of the cellocator protocol on this device, for example: Charging, Door, Driver ID (RFID / iButton), Ignition, Digital inputs. Each one can become a sensor or an alert.
Can I send commands to the Cellocator CelloTrack Solar from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the Cellocator CelloTrack Solar, including: Output control.
Which alarms does the Cellocator CelloTrack Solar report?
TrackeraX recognizes these cellocator alarms: Low power, Power cut, SOS. Any of them can become an email, push or webhook notification.
How do I add the Cellocator CelloTrack Solar to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6033 and create it in TrackeraX with its IMEI, choosing the Cellocator CelloTrack Solar model.
Try the CelloTrack Solar on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

