Ekas Technologies Ekas Tracker on TrackeraX
The Ekas Technologies Ekas Tracker is a GPS tracker that works with TrackeraX over the cellocator protocol on port 6033. From the platform it supports output control, plus custom commands. The server decodes 3 alarm types from this protocol, such as low power, power cut and sos.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6033 (cellocator protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Ekas Technologies Ekas Tracker model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output controloutputControl
- Custom commandcustom
[ Data reported by the cellocator protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Chargingcharge
- Doordoor
- Driver ID (RFID / iButton)driverUniqueId
- Ignitionignition
- Digital inputsinput
- Odometerodometer
- Satellitessat
- Firmware versionversionFw
- Hardware versionversionHw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- IO elements (io1, io2…)
[ Alarms the protocol can report ]
- Low powerlowPower
- Power cutpowerCut
- SOSsos
[ Protocol-specific attributes ]
mode
[ Other devices on the cellocator protocol ]
Ekas Technologies Ekas Tracker FAQ
Which port does the Ekas Technologies Ekas Tracker use to connect to TrackeraX?
The Ekas Technologies Ekas Tracker uses the cellocator protocol and connects to port 6033 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Ekas Technologies Ekas Tracker send to the platform?
TrackeraX reads 11 parameters of the cellocator protocol on this device, for example: Charging, Door, Driver ID (RFID / iButton), Ignition, Digital inputs. Each one can become a sensor or an alert.
Can I send commands to the Ekas Technologies Ekas Tracker from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the Ekas Technologies Ekas Tracker, including: Output control.
Which alarms does the Ekas Technologies Ekas Tracker report?
TrackeraX recognizes these cellocator alarms: Low power, Power cut, SOS. Any of them can become an email, push or webhook notification.
How do I add the Ekas Technologies Ekas Tracker to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6033 and create it in TrackeraX with its IMEI, choosing the Ekas Technologies Ekas Tracker model.
Try the Ekas Tracker on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

