[ GPS device ]

EasyTrack E3+ on TrackeraX

The EasyTrack E3+ is a GPS tracker that works with TrackeraX over the easytrack protocol on port 6056. From the platform it supports engine stop, engine resume and arm alarm, plus custom commands. The server decodes 14 alarm types from this protocol, such as geofence entry, geofence exit and harsh acceleration.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6056 (easytrack protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the EasyTrack E3+ model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Arm alarmalarmArm
  • Disarm alarmalarmDisarm
  • Custom commandcustom

[ Data reported by the easytrack protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Blockedblocked
  • Coolant temperaturecoolantTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Engine hourshours
  • Ignitionignition
  • OBD speedobdSpeed
  • Odometerodometer
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Jammingjamming
  • Low batterylowBattery
  • Low powerlowPower
  • Overspeedoverspeed
  • Power cutpowerCut
  • Removalremoving
  • SOSsos
  • Tamperingtampering
  • Temperaturetemperature
  • Vibrationvibration

[ Other EasyTrack models ]

[ Other devices on the easytrack protocol ]

EasyTrack E3+ FAQ

Which port does the EasyTrack E3+ use to connect to TrackeraX?

The EasyTrack E3+ uses the easytrack protocol and connects to port 6056 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the EasyTrack E3+ send to the platform?

TrackeraX reads 18 parameters of the easytrack protocol on this device, for example: Battery voltage, Blocked, Coolant temperature, Driver ID (RFID / iButton), Engine load. Each one can become a sensor or an alert.

Can I send commands to the EasyTrack E3+ from TrackeraX?

Yes. From the map or the device page you can send 4 command types to the EasyTrack E3+, including: Engine stop, Engine resume, Arm alarm, Disarm alarm.

Which alarms does the EasyTrack E3+ report?

TrackeraX recognizes these easytrack alarms: Geofence entry, Geofence exit, Harsh acceleration, Harsh braking, Jamming. Any of them can become an email, push or webhook notification.

How do I add the EasyTrack E3+ to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6056 and create it in TrackeraX with its IMEI, choosing the EasyTrack E3+ model.

Try the E3+ on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.