[ GPS device ]

EasyTrack Plus on TrackeraX

The EasyTrack Plus is a GPS tracker that works with TrackeraX over the easytrackplus protocol on port 7056. From the platform it accepts custom commands. The server decodes 14 alarm types from this protocol, such as geofence entry, geofence exit and harsh acceleration.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 7056 (easytrackplus protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the EasyTrack Plus model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the easytrackplus protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Blockedblocked
  • Coolant temperaturecoolantTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Engine hourshours
  • Ignitionignition
  • OBD speedobdSpeed
  • Odometerodometer
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Throttlethrottle

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Geofence entrygeofenceEnter
  • Geofence exitgeofenceExit
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Jammingjamming
  • Low batterylowBattery
  • Low powerlowPower
  • Overspeedoverspeed
  • Power cutpowerCut
  • Removalremoving
  • SOSsos
  • Tamperingtampering
  • Temperaturetemperature
  • Vibrationvibration

[ Other EasyTrack models ]

EasyTrack Plus FAQ

Which port does the EasyTrack Plus use to connect to TrackeraX?

The EasyTrack Plus uses the easytrackplus protocol and connects to port 7056 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the EasyTrack Plus send to the platform?

TrackeraX reads 18 parameters of the easytrackplus protocol on this device, for example: Battery voltage, Blocked, Coolant temperature, Driver ID (RFID / iButton), Engine load. Each one can become a sensor or an alert.

Which alarms does the EasyTrack Plus report?

TrackeraX recognizes these easytrackplus alarms: Geofence entry, Geofence exit, Harsh acceleration, Harsh braking, Jamming. Any of them can become an email, push or webhook notification.

How do I add the EasyTrack Plus to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 7056 and create it in TrackeraX with its IMEI, choosing the EasyTrack Plus model.

Try the EasyTrack Plus on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.