[ GPS device ]

Enfora GSM2448 on TrackeraX

The Enfora GSM2448 is a GPS tracker that works with TrackeraX over the enfora protocol on port 6008. From the platform it supports engine stop and engine resume, plus custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6008 (enfora protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Enfora GSM2448 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom

[ Other Enfora models ]

Enfora GSM2448 FAQ

Which port does the Enfora GSM2448 use to connect to TrackeraX?

The Enfora GSM2448 uses the enfora protocol and connects to port 6008 on your TrackeraX server. Just set your platform domain and that port on the device.

Can I send commands to the Enfora GSM2448 from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Enfora GSM2448, including: Engine stop, Engine resume.

How do I add the Enfora GSM2448 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6008 and create it in TrackeraX with its IMEI, choosing the Enfora GSM2448 model.

Try the Enfora GSM2448 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.