[ GPS device ]

Enfora MT4000 on TrackeraX

The Enfora MT4000 is a vehicle tracker with 2G (GSM/GPRS). In TrackeraX it connects over the enfora protocol on port 6008 and accepts 3 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6008 (enfora protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Enfora MT4000 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Custom commandcustom

[ Other Enfora models ]

Enfora MT4000 FAQ

Which port does the Enfora MT4000 use to connect to TrackeraX?

The Enfora MT4000 uses the enfora protocol and connects to port 6008 on your TrackeraX server. Just set your platform domain and that port on the device.

Can I send commands to the Enfora MT4000 from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the Enfora MT4000, including: Engine stop, Engine resume.

How do I add the Enfora MT4000 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6008 and create it in TrackeraX with its IMEI, choosing the Enfora MT4000 model.

Try the Enfora MT4000 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.