Envotech / RadioSecure on TrackeraX
The Envotech / RadioSecure is a GPS tracker that works with TrackeraX over the envotech protocol on port 6240. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as lock and unlock.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6240 (envotech protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Envotech / RadioSecure model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the envotech protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Fuelfuel
- Digital inputsinput
- External powerpower
- GSM signalrssi
Numbered inputs and sensors
- Outputs (out1, out2…)
[ Alarms the protocol can report ]
- Locklock
- Unlockunlock
[ Protocol-specific attributes ]
weight
[ Other Envotech models ]
[ Other devices on the envotech protocol ]
Envotech / RadioSecure FAQ
Which port does the Envotech / RadioSecure use to connect to TrackeraX?
The Envotech / RadioSecure uses the envotech protocol and connects to port 6240 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Envotech / RadioSecure send to the platform?
TrackeraX reads 6 parameters of the envotech protocol on this device, for example: Battery voltage, Fuel, Digital inputs, External power, GSM signal. Each one can become a sensor or an alert.
Which alarms does the Envotech / RadioSecure report?
TrackeraX recognizes these envotech alarms: Lock, Unlock. Any of them can become an email, push or webhook notification.
How do I add the Envotech / RadioSecure to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6240 and create it in TrackeraX with its IMEI, choosing the Envotech / RadioSecure model.
Try the Envotech / RadioSecure on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

