RadioSecure Xtivator on TrackeraX
The RadioSecure Xtivator is a GPS tracker that works with TrackeraX over the envotech protocol on port 6240. From the platform it accepts custom commands. The server decodes 2 alarm types from this protocol, such as lock and unlock.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6240 (envotech protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the RadioSecure Xtivator model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the envotech protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Fuelfuel
- Digital inputsinput
- External powerpower
- GSM signalrssi
Numbered inputs and sensors
- Outputs (out1, out2…)
[ Alarms the protocol can report ]
- Locklock
- Unlockunlock
[ Protocol-specific attributes ]
weight
[ Other RadioSecure models ]
[ Other devices on the envotech protocol ]
RadioSecure Xtivator FAQ
Which port does the RadioSecure Xtivator use to connect to TrackeraX?
The RadioSecure Xtivator uses the envotech protocol and connects to port 6240 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the RadioSecure Xtivator send to the platform?
TrackeraX reads 6 parameters of the envotech protocol on this device, for example: Battery voltage, Fuel, Digital inputs, External power, GSM signal. Each one can become a sensor or an alert.
Which alarms does the RadioSecure Xtivator report?
TrackeraX recognizes these envotech alarms: Lock, Unlock. Any of them can become an email, push or webhook notification.
How do I add the RadioSecure Xtivator to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6240 and create it in TrackeraX with its IMEI, choosing the RadioSecure Xtivator model.
Try the Xtivator on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

