Galileosky 7x 3G on TrackeraX
The Galileosky 7x 3G is a GPS tracker with 3G, 2G (GSM/GPRS) and Bluetooth Low Energy. In TrackeraX it connects over the galileo protocol on port 6034 and accepts 2 commands from the platform.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6034 (galileo protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Galileosky 7x 3G model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Hardware and connectivity ]
- 3G
- Bluetooth
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output controloutputControl
- Custom commandcustom
[ Data reported by the galileo protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Accelerationacceleration
- Battery voltagebattery
- Device temperaturedeviceTemp
- Driver ID (RFID / iButton)driverUniqueId
- Fuelfuel
- HDOPhdop
- Photoimage
- Digital inputsinput
- Odometerodometer
- Digital outputsoutput
- External powerpower
- RPMrpm
- Firmware versionversionFw
- Hardware versionversionHw
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Protocol-specific attributes ]
can16BitR · can32BitR · can8BitR · canB0 · canB1 · deviceId · fuelTotal · rs2320 · rs2321 · statusExtended · userData · userDataArray
[ Other Galileosky models ]
Galileosky 7x 3G FAQ
Which port does the Galileosky 7x 3G use to connect to TrackeraX?
The Galileosky 7x 3G uses the galileo protocol and connects to port 6034 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Galileosky 7x 3G send to the platform?
TrackeraX reads 16 parameters of the galileo protocol on this device, for example: Acceleration, Battery voltage, Device temperature, Driver ID (RFID / iButton), Fuel. Each one can become a sensor or an alert.
Can I send commands to the Galileosky 7x 3G from TrackeraX?
Yes. From the map or the device page you can send 1 command types to the Galileosky 7x 3G, including: Output control.
How do I add the Galileosky 7x 3G to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6034 and create it in TrackeraX with its IMEI, choosing the Galileosky 7x 3G model.
Try the 7x 3G on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

