[ GPS device ]

Gator M588N on TrackeraX

The Gator M588N is a GPS tracker that works with TrackeraX over the gator protocol on port 6052. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 4 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6052 (gator protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Gator M588N model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Request positionpositionSingle
  • Set odometersetOdometer
  • Speed limitsetSpeedLimit
  • Custom commandcustom

[ Data reported by the gator protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Odometerodometer
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Overspeedoverspeed

[ Protocol-specific attributes ]

key

[ Other Gator models ]

Gator M588N FAQ

Which port does the Gator M588N use to connect to TrackeraX?

The Gator M588N uses the gator protocol and connects to port 6052 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Gator M588N send to the platform?

TrackeraX reads 4 parameters of the gator protocol on this device, for example: Odometer, Satellites. Each one can become a sensor or an alert.

Can I send commands to the Gator M588N from TrackeraX?

Yes. From the map or the device page you can send 5 command types to the Gator M588N, including: Engine stop, Engine resume, Request position, Set odometer, Speed limit.

Which alarms does the Gator M588N report?

TrackeraX recognizes these gator alarms: Harsh acceleration, Harsh braking, Harsh cornering, Overspeed. Any of them can become an email, push or webhook notification.

How do I add the Gator M588N to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6052 and create it in TrackeraX with its IMEI, choosing the Gator M588N model.

Try the Gator M588N on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.