Gator S228 on TrackeraX
The Gator S228 is a GPS tracker that works with TrackeraX over the gator protocol on port 6052. From the platform it supports engine stop, engine resume and request position, plus custom commands. The server decodes 4 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6052 (gator protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Gator S228 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Request positionpositionSingle
- Set odometersetOdometer
- Speed limitsetSpeedLimit
- Custom commandcustom
[ Data reported by the gator protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Odometerodometer
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Temperature sensors (temp1, temp2…)
[ Alarms the protocol can report ]
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Overspeedoverspeed
[ Protocol-specific attributes ]
key
[ Other Gator models ]
Gator S228 FAQ
Which port does the Gator S228 use to connect to TrackeraX?
The Gator S228 uses the gator protocol and connects to port 6052 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Gator S228 send to the platform?
TrackeraX reads 4 parameters of the gator protocol on this device, for example: Odometer, Satellites. Each one can become a sensor or an alert.
Can I send commands to the Gator S228 from TrackeraX?
Yes. From the map or the device page you can send 5 command types to the Gator S228, including: Engine stop, Engine resume, Request position, Set odometer, Speed limit.
Which alarms does the Gator S228 report?
TrackeraX recognizes these gator alarms: Harsh acceleration, Harsh braking, Harsh cornering, Overspeed. Any of them can become an email, push or webhook notification.
How do I add the Gator S228 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6052 and create it in TrackeraX with its IMEI, choosing the Gator S228 model.
Try the Gator S228 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

