[ GPS device ]

GlobalSat TR-203 on TrackeraX

The GlobalSat TR-203 is a GPS tracker with 2G (GSM/GPRS). In TrackeraX it connects over the globalsat protocol on port 6043 and accepts 3 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6043 (globalsat protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the GlobalSat TR-203 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Output controloutputControl
  • Dismiss alarmalarmDismiss
  • Custom commandcustom

[ Data reported by the globalsat protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Battery levelbatteryLevel
  • Chargingcharge
  • HDOPhdop
  • Ignitionignition
  • Motionmotion
  • External powerpower
  • Satellitessat

Numbered inputs and sensors

  • Inputs (in1, in2…)
  • Outputs (out1, out2…)

[ Alarms the protocol can report ]

  • Geofencegeofence
  • Low powerlowPower
  • Overspeedoverspeed
  • Power cutpowerCut
  • SOSsos

[ Other GlobalSat models ]

GlobalSat TR-203 FAQ

Which port does the GlobalSat TR-203 use to connect to TrackeraX?

The GlobalSat TR-203 uses the globalsat protocol and connects to port 6043 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the GlobalSat TR-203 send to the platform?

TrackeraX reads 10 parameters of the globalsat protocol on this device, for example: Battery voltage, Battery level, Charging, HDOP, Ignition. Each one can become a sensor or an alert.

Can I send commands to the GlobalSat TR-203 from TrackeraX?

Yes. From the map or the device page you can send 2 command types to the GlobalSat TR-203, including: Output control, Dismiss alarm.

Which alarms does the GlobalSat TR-203 report?

TrackeraX recognizes these globalsat alarms: Geofence, Low power, Overspeed, Power cut, SOS. Any of them can become an email, push or webhook notification.

How do I add the GlobalSat TR-203 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6043 and create it in TrackeraX with its IMEI, choosing the GlobalSat TR-203 model.

Try the GlobalSat TR-203 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.