GlobalSat GTR-128 on TrackeraX
The GlobalSat GTR-128 is a GPS tracker that works with TrackeraX over the globalsat protocol on port 6043. From the platform it supports output control and dismiss alarm, plus custom commands. The server decodes 5 alarm types from this protocol, such as geofence, low power and overspeed.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6043 (globalsat protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the GlobalSat GTR-128 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Output controloutputControl
- Dismiss alarmalarmDismiss
- Custom commandcustom
[ Data reported by the globalsat protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Battery levelbatteryLevel
- Chargingcharge
- HDOPhdop
- Ignitionignition
- Motionmotion
- External powerpower
- Satellitessat
Numbered inputs and sensors
- Inputs (in1, in2…)
- Outputs (out1, out2…)
[ Alarms the protocol can report ]
- Geofencegeofence
- Low powerlowPower
- Overspeedoverspeed
- Power cutpowerCut
- SOSsos
[ Other GlobalSat models ]
GlobalSat GTR-128 FAQ
Which port does the GlobalSat GTR-128 use to connect to TrackeraX?
The GlobalSat GTR-128 uses the globalsat protocol and connects to port 6043 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the GlobalSat GTR-128 send to the platform?
TrackeraX reads 10 parameters of the globalsat protocol on this device, for example: Battery voltage, Battery level, Charging, HDOP, Ignition. Each one can become a sensor or an alert.
Can I send commands to the GlobalSat GTR-128 from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the GlobalSat GTR-128, including: Output control, Dismiss alarm.
Which alarms does the GlobalSat GTR-128 report?
TrackeraX recognizes these globalsat alarms: Geofence, Low power, Overspeed, Power cut, SOS. Any of them can become an email, push or webhook notification.
How do I add the GlobalSat GTR-128 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6043 and create it in TrackeraX with its IMEI, choosing the GlobalSat GTR-128 model.
Try the GTR-128 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

