ITS / AIS140 on TrackeraX
The ITS / AIS140 is a GPS tracker that works with TrackeraX over the its protocol on port 6179. From the platform it supports engine stop and engine resume, plus custom commands. The server decodes 9 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6179 (its protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the ITS / AIS140 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Engine stopengineStop
- Engine resumeengineResume
- Custom commandcustom
[ Data reported by the its protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Battery voltagebattery
- Chargingcharge
- G-sensorgSensor
- HDOPhdop
- Ignitionignition
- Digital inputsinput
- Odometerodometer
- Mobile operatoroperator
- Digital outputsoutput
- PDOPpdop
- External powerpower
- Satellitessat
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
[ Alarms the protocol can report ]
- Harsh accelerationhardAcceleration
- Harsh brakinghardBraking
- Harsh corneringhardCornering
- Low batterylowBattery
- Overspeedoverspeed
- Power cutpowerCut
- Power restoredpowerRestored
- SOSsos
- Tamperingtampering
[ Protocol-specific attributes ]
emergency · response · responseFormat · tiltX · tiltY
[ Other ITS models ]
ITS / AIS140 FAQ
Which port does the ITS / AIS140 use to connect to TrackeraX?
The ITS / AIS140 uses the its protocol and connects to port 6179 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the ITS / AIS140 send to the platform?
TrackeraX reads 13 parameters of the its protocol on this device, for example: Battery voltage, Charging, G-sensor, HDOP, Ignition. Each one can become a sensor or an alert.
Can I send commands to the ITS / AIS140 from TrackeraX?
Yes. From the map or the device page you can send 2 command types to the ITS / AIS140, including: Engine stop, Engine resume.
Which alarms does the ITS / AIS140 report?
TrackeraX recognizes these its alarms: Harsh acceleration, Harsh braking, Harsh cornering, Low battery, Overspeed. Any of them can become an email, push or webhook notification.
How do I add the ITS / AIS140 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6179 and create it in TrackeraX with its IMEI, choosing the ITS / AIS140 model.
Try the ITS / AIS140 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

