[ GPS device ]

ITS ITS2 protocol on TrackeraX

The ITS ITS2 protocol is a GPS tracker that works with TrackeraX over the its2 protocol on port 6301. From the platform it accepts custom commands. The server decodes 9 alarm types from this protocol, such as harsh acceleration, harsh braking and harsh cornering.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6301 (its2 protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the ITS ITS2 protocol model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the its2 protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • G-sensorgSensor
  • HDOPhdop
  • Ignitionignition
  • Digital inputsinput
  • Odometerodometer
  • Mobile operatoroperator
  • Digital outputsoutput
  • PDOPpdop
  • External powerpower
  • Satellitessat

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)

[ Alarms the protocol can report ]

  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Harsh corneringhardCornering
  • Low batterylowBattery
  • Overspeedoverspeed
  • Power cutpowerCut
  • Power restoredpowerRestored
  • SOSsos
  • Tamperingtampering

[ Protocol-specific attributes ]

emergency · response · responseFormat · tiltX · tiltY

[ Other ITS models ]

ITS ITS2 protocol FAQ

Which port does the ITS ITS2 protocol use to connect to TrackeraX?

The ITS ITS2 protocol uses the its2 protocol and connects to port 6301 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the ITS ITS2 protocol send to the platform?

TrackeraX reads 13 parameters of the its2 protocol on this device, for example: Battery voltage, Charging, G-sensor, HDOP, Ignition. Each one can become a sensor or an alert.

Which alarms does the ITS ITS2 protocol report?

TrackeraX recognizes these its2 alarms: Harsh acceleration, Harsh braking, Harsh cornering, Low battery, Overspeed. Any of them can become an email, push or webhook notification.

How do I add the ITS ITS2 protocol to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6301 and create it in TrackeraX with its IMEI, choosing the ITS ITS2 protocol model.

Try the ITS2 protocol on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.