Navtelecom S-4752 on TrackeraX
The Navtelecom S-4752 is a GPS tracker that works with TrackeraX over the navis protocol on port 6019. From the platform it accepts custom commands.
[ How to connect it to TrackeraX ]
- Insert a SIM card with mobile data and set the APN of your carrier on the device.
- Set the server to the domain of your TrackeraX platform and the port 6019 (navis protocol).
- Create the device in TrackeraX with its IMEI or identifier and choose the Navtelecom S-4752 model.
- Wait for the first position and turn the parameters above into sensors and alerts.
The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.
[ Commands you can send from TrackeraX ]
Available from the web platform and the apps. The custom command sends any text the device firmware accepts.
- Custom commandcustom
[ Data reported by the navis protocol ]
Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.
- Armedarmed
- Axle weightaxleWeight
- Battery voltagebattery
- Coolant temperaturecoolantTemp
- Distancedistance
- Engine loadengineLoad
- Fuelfuel
- Fuel usedfuelUsed
- HDOPhdop
- Engine hourshours
- Digital inputsinput
- OBD odometerobdOdometer
- OBD speedobdSpeed
- Odometerodometer
- Digital outputsoutput
- PDOPpdop
- External powerpower
- RPMrpm
- GSM signalrssi
- Satellitessat
- Visible satellitessatVisible
- Service odometerserviceOdometer
Numbered inputs and sensors
- Analog inputs (adc1, adc2…)
- Counters (count1, count2…)
- Inputs (in1, in2…)
- Outputs (out1, out2…)
- Temperature sensors (temp1, temp2…)
[ Protocol-specific attributes ]
acceleratorPosition · brakePosition · format · freq · fuelTemp · obdAdBlue · obdAdBlueLevel · obdFuel · obdFuelLevel · obdHours · user1Byte · user2Byte · user4Byte · user8Byte
[ Other Navtelecom models ]
[ Other devices on the navis protocol ]
Navtelecom S-4752 FAQ
Which port does the Navtelecom S-4752 use to connect to TrackeraX?
The Navtelecom S-4752 uses the navis protocol and connects to port 6019 on your TrackeraX server. Just set your platform domain and that port on the device.
What data does the Navtelecom S-4752 send to the platform?
TrackeraX reads 27 parameters of the navis protocol on this device, for example: Armed, Axle weight, Battery voltage, Coolant temperature, Distance. Each one can become a sensor or an alert.
How do I add the Navtelecom S-4752 to my platform?
Insert a data SIM, set the APN, point the device to your platform domain on port 6019 and create it in TrackeraX with its IMEI, choosing the Navtelecom S-4752 model.
Try the S-4752 on your own platform
Open the live demo or check the plans: white label, your domain, your apps.
Brands, logos and product images belong to their respective owners.

