[ GPS device ]

Navtelecom Signal S-4651 on TrackeraX

The Navtelecom Signal S-4651 is a GPS tracker that works with TrackeraX over the navis protocol on port 6019. From the platform it accepts custom commands.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6019 (navis protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Navtelecom Signal S-4651 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Custom commandcustom

[ Data reported by the navis protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Armedarmed
  • Axle weightaxleWeight
  • Battery voltagebattery
  • Coolant temperaturecoolantTemp
  • Distancedistance
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel usedfuelUsed
  • HDOPhdop
  • Engine hourshours
  • Digital inputsinput
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Odometerodometer
  • Digital outputsoutput
  • PDOPpdop
  • External powerpower
  • RPMrpm
  • GSM signalrssi
  • Satellitessat
  • Visible satellitessatVisible
  • Service odometerserviceOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Counters (count1, count2…)
  • Inputs (in1, in2…)
  • Outputs (out1, out2…)
  • Temperature sensors (temp1, temp2…)

[ Protocol-specific attributes ]

acceleratorPosition · brakePosition · format · freq · fuelTemp · obdAdBlue · obdAdBlueLevel · obdFuel · obdFuelLevel · obdHours · user1Byte · user2Byte · user4Byte · user8Byte

[ Other Navtelecom models ]

[ Other devices on the navis protocol ]

Navtelecom Signal S-4651 FAQ

Which port does the Navtelecom Signal S-4651 use to connect to TrackeraX?

The Navtelecom Signal S-4651 uses the navis protocol and connects to port 6019 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Navtelecom Signal S-4651 send to the platform?

TrackeraX reads 27 parameters of the navis protocol on this device, for example: Armed, Axle weight, Battery voltage, Coolant temperature, Distance. Each one can become a sensor or an alert.

How do I add the Navtelecom Signal S-4651 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6019 and create it in TrackeraX with its IMEI, choosing the Navtelecom Signal S-4651 model.

Try the Signal S-4651 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.