[ GPS device ]

Ruptela Eco5 on TrackeraX

The Ruptela Eco5 is a GPS tracker with Bluetooth Low Energy. In TrackeraX it connects over the ruptela protocol on port 6046 and accepts 10 commands from the platform.

[ How to connect it to TrackeraX ]

  1. Insert a SIM card with mobile data and set the APN of your carrier on the device.
  2. Set the server to the domain of your TrackeraX platform and the port 6046 (ruptela protocol).
  3. Create the device in TrackeraX with its IMEI or identifier and choose the Ruptela Eco5 model.
  4. Wait for the first position and turn the parameters above into sensors and alerts.

The exact commands to set the APN and server depend on the firmware: check the manufacturer's manual or ask our support team.

[ Hardware and connectivity ]

  • Bluetooth

[ Commands you can send from TrackeraX ]

Available from the web platform and the apps. The custom command sends any text the device firmware accepts.

  • Engine stopengineStop
  • Engine resumeengineResume
  • Output controloutputControl
  • Firmware versiongetVersion
  • Configurationconfiguration
  • Firmware updatefirmwareUpdate
  • Server connectionsetConnection
  • Set odometersetOdometer
  • Custom commandcustom
  • Request photorequestPhoto

[ Data reported by the ruptela protocol ]

Parameters the server decodes from this protocol. In TrackeraX you turn them into sensors, alerts and reports. Each model reports the ones its firmware and wiring allow.

  • Battery voltagebattery
  • Chargingcharge
  • Device temperaturedeviceTemp
  • Driver ID (RFID / iButton)driverUniqueId
  • Fault codes (DTC)dtcs
  • Engine loadengineLoad
  • Fuelfuel
  • Fuel consumptionfuelConsumption
  • Fuel levelfuelLevel
  • Fuel usedfuelUsed
  • HDOPhdop
  • Ignitionignition
  • Photoimage
  • Motionmotion
  • OBD odometerobdOdometer
  • OBD speedobdSpeed
  • Odometerodometer
  • Mobile operatoroperator
  • External powerpower
  • RPMrpm
  • Satellitessat
  • Trip odometertripOdometer

Numbered inputs and sensors

  • Analog inputs (adc1, adc2…)
  • Inputs (in1, in2…)
  • IO elements (io1, io2…)
  • Temperature sensors (temp1, temp2…)

[ Alarms the protocol can report ]

  • Accidentaccident
  • GPS antenna cutgpsAntennaCut
  • Harsh accelerationhardAcceleration
  • Harsh brakinghardBraking
  • Jammingjamming
  • Tamperingtampering
  • Towingtow

[ Protocol-specific attributes ]

di · tagId

[ Other Ruptela models ]

Ruptela Eco5 FAQ

Which port does the Ruptela Eco5 use to connect to TrackeraX?

The Ruptela Eco5 uses the ruptela protocol and connects to port 6046 on your TrackeraX server. Just set your platform domain and that port on the device.

What data does the Ruptela Eco5 send to the platform?

TrackeraX reads 26 parameters of the ruptela protocol on this device, for example: Battery voltage, Charging, Device temperature, Driver ID (RFID / iButton), Fault codes (DTC). Each one can become a sensor or an alert.

Can I send commands to the Ruptela Eco5 from TrackeraX?

Yes. From the map or the device page you can send 9 command types to the Ruptela Eco5, including: Engine stop, Engine resume, Output control, Firmware version, Configuration.

Which alarms does the Ruptela Eco5 report?

TrackeraX recognizes these ruptela alarms: Accident, GPS antenna cut, Harsh acceleration, Harsh braking, Jamming. Any of them can become an email, push or webhook notification.

How do I add the Ruptela Eco5 to my platform?

Insert a data SIM, set the APN, point the device to your platform domain on port 6046 and create it in TrackeraX with its IMEI, choosing the Ruptela Eco5 model.

Try the Ruptela Eco5 on your own platform

Open the live demo or check the plans: white label, your domain, your apps.

Brands, logos and product images belong to their respective owners.